|
|
| Technical Specs |
| Pearlcorder J1 |
|
| Drive system: |
Capstan drive |
| Tracks: |
2 tracks, 1 channel monophonic |
| Tape: |
Microcassette |
| Tape speed: |
2.4cm/sec., 1.2cm/sec. switchable |
| Recording method: |
Automatic recording level adjustment |
| Voice activation: |
Continuous adjustment using volume knob in the VCVE recording mode |
| Speaker: |
28mm dynamic internal speaker |
| Overall frequency response: |
400 ~ 4,000Hz at 2.4cm/sec.
400 ~ 3,000Hz at 1.2cm/sec. |
| MIC jack: |
2.5mm diameter, impedance 2k W |
| Earphone jack: |
2.5mm diameter, impedance 8 W |
| Practical max. output: |
90mW at 2.4cm/sec. |
| Continuous battery duration Time: |
Recording time 6 hours (when alkaline manganese dry cell batteries are used by the Olympus testing method) |
| Power source: |
Rated voltage 1.5V DC
Battery: one AAA battery (R03, LR03) |
| External power supply: |
Connect the special voltage adapter in the shape of a type AAA (R03, LRo3) battery |
| External dimensions: |
117(L) x 18(H) x 52(W) mm / 4.6 x 0.7 x 2.0 in. (excluding protrusions) |
| Weight: |
102g (3.6oz) (including battery) |
|
|
