Flashes |
FL-14 Flash
The FL-14 is an easy-to-operate external flash with a design that matches the E-P1 Pen. With an equivalent GN (Guide Number) of 14, you can accomplish flash shooting with stable light and optimum brightness.
Silver metal exterior fits to the camera body design
Guide Number 20 at ISO 200
28mm equivalent coverage
AAA batteries x2 provide about 80 shots at full power
Approximately 5 second recycle time
3 modes: TTL-AUTO, AUTO, Manual
Item #260122
|
 |
 |
FL-36R Flash
The FL-36R is a lightweight and compact wireless external flash. Wireless flash transmission channel settings can be controlled from the camera body, and they enable selection of flash/no flash for groups of multiple flash units. It's equipped with a 1/8 step illumination control for precision shooting, a wide-angle diffuser panel for even illumination with wide-angle lenses and a compact zoom head to accommodate lenses from wide-angle to telephoto.
Item #260115
$25 Instant Rebate! Enter coupon code SAVFL36 at checkout. Offer good until Dec 31, 2009.
Wireless mode is not fully functional with the E-P1 Pen, or the E-1 or Evolt 300\330\410\500\510. Wireless Mode only works in Manual mode on the flash, not TTL. The flash will provide TTL when mounted directly on these models.
Note: Wireless TTL mode is possible with the SP-560UZ and SP-565UZ, these models do not have a hotshoe. The firmware of the SP-560 UZ must be updated to provide this functionality. This can be done via Olympus Master 2.x software.
Consider using our rechargeable batteries in the FL-36R:
Ni-MH Quick Charger and Battery Set (B-90SU)
 |
 |
|
 |
|
FL-50R Flash
The FL-50R is an external flash unit that allows wireless flash settings to be controlled from the camera body. Wireless flash transmission channel settings enable selection of flash/no flash for groups of multiple flash units. In addition it allows TTL auto, auto, and manual modes to be set; offers a bounce and swivel head; and flash coverage is automatically adjusted in several steps to correspond to the image area when zooming. The FL-50 provides GN28 at a 12mm focal length (equivalent to 24mm on a 35mm camera; ISO 100) and GN50 at 42mm focal length (equivalent to 85mm on a 35mm camera; ISO 100).
Item #260116
$50 Instant Rebate! Enter coupon code SAVFL50 at checkout. Offer good until Dec 31, 2009.
Wireless mode is not fully functional with the E-P1 Pen, or the E-1 or Evolt 300\330\410\500\510. Wireless Mode only works in Manual mode on the flash, not TTL. The flash will provide TTL when mounted directly on these models.
Note: Wireless TTL mode is possible with the SP-560UZ and SP-565UZ, these models do not have a hotshoe. The firmware of the SP-560 UZ must be updated to provide this functionality. This can be done via Olympus Master 2.x software.
Replacement diffuser:
Flash Dome Diffuser
Consider using our rechargeable batteries in the FL-50R:
Ni-MH Quick Charger and Battery Set (B-90SU)
|
|
|
 |
|
Flash (FL-20)
Exclusively designed for use with the Olympus digital cameras, this external flash unit combines power and versatile performance in a very compact, stylish form. With a high max. guide number of 20, the FL-20 ensures effective illumination while the manual, normal auto and auto TTL control modes allow the user the choice between full creativity or worry-free automatic operation.
The FL-20 flash attaches directly the hot shoe of the camera. It can also be used with the FL-BK01 Flash Bracket . When used with the FL-BK01, the TTL-TTL Cable (FL-CB01) is required for cameras with a TTL connector. Cameras with a hotshoe will require the Hot Shoe Cable (FL-CB02) when used with the FL-BK01. Purchase the Hot Shoe Flash Cable (FL-CB05) if you have a camera with a hotshoe and would like to use a generic flash bracket.
Guide Number 20m (65ft)
Item #200858
Consider using our rechargeable batteries in the FL-20:
Ni-MH Quick Charger and Battery Set (B-90SU)
Want to review the manual before purchase? Click here and choose save to download.
Please be aware this may be a large file.
|
|
|
 |
|
Flash (FL-20) - Scuffed Packaging
Exclusively designed for use with the Olympus digital cameras, this external flash unit combines power and versatile performance in a very compact, stylish form. With a high max. guide number of 20, the FL-20 ensures effective illumination while the manual, normal auto and auto TTL control modes allow the user the choice between full creativity or worry-free automatic operation.
The FL-20 flash attaches directly the hot shoe of the camera. It can also be used with the FL-BK01 Flash Bracket . When used with the FL-BK01, the TTL-TTL Cable (FL-CB01) is required for cameras with a TTL connector. Cameras with a hotshoe will require the Hot Shoe Cable (FL-CB02) when used with the FL-BK01. Purchase the Hot Shoe Flash Cable (FL-CB05) if you have a camera with a hotshoe and would like to use a generic flash bracket.
Guide Number 20m (65ft)
Item #200858-424
Consider using our rechargeable batteries in the FL-20:
Ni-MH Quick Charger and Battery Set (B-90SU)
This product is offered by Olympus as a special opportunity for Emporium customers to purchase NEW Olympus accessories at reduced prices. These products all have minor packaging imperfections, such as scratched or scuffed covers. The product inside is brand new and covered by a full Olympus warranty.
Want to review the manual before purchase? Click here and choose save to download.
Please be aware this may be a large file.
|
|
|
|
|
Flash (FL-36)
An external flash unit specifically designed for digital cameras, the FL-36 is equipped with a 1/8 step illumination control for precision shooting, a wide-angle diffuser panel for even illumination with wide-angle lenses, a lockable bounce and swivel mechanism for bounce photography from left-right or top-bottom, and a compact zoom head to accommodate lenses from wide-angle to telephoto.
It can be powered using two AA batteries or one CR-3 volt lithium, and offers impressive control due to its ultra-precision mounting technology that allows it to communicate directly with digital cameras such as the EVOLT E-300. In addition, it is lightweight and compact for desired portability.
Attaches to camera via hot shoe, cable or the
FL-BK01 Flash Bracket . When used with the FL-BK01, the TTL-TTL Cable (FL-CB01) is required for cameras with a TTL connector. Cameras with a hotshoe will require the Hot Shoe Cable (FL-CB02) when used with the FL-BK01. Purchase the Hot Shoe Flash Cable (FL-CB05) if you have a camera with a hotshoe and would like to use a generic flash bracket.
Item #260113
Consider using our rechargeable batteries in the FL-36:
Ni-MH Quick Charger and Battery Set (B-90SU)
|
|
|
 |
|
Flash (FL-36) - Reconditioned
An external flash unit specifically designed for digital cameras, the FL-36 is equipped with a 1/8 step illumination control for precision shooting, a wide-angle diffuser panel for even illumination with wide-angle lenses, a lockable bounce and swivel mechanism for bounce photography from left-right or top-bottom, and a compact zoom head to accommodate lenses from wide-angle to telephoto.
It can be powered using two AA batteries or one CR-3 volt lithium, and offers impressive control due to its ultra-precision mounting technology that allows it to communicate directly with digital cameras such as the EVOLT E-300. In addition, it is lightweight and compact for desired portability.
Attaches to camera via hot shoe, cable or the
FL-BK01 Flash Bracket . When used with the FL-BK01, the TTL-TTL Cable (FL-CB01) is required for cameras with a TTL connector. Cameras with a hotshoe will require the Hot Shoe Cable (FL-CB02) when used with the FL-BK01. Purchase the Hot Shoe Flash Cable (FL-CB05) if you have a camera with a hotshoe and would like to use a generic flash bracket.
Item #260113
Consider using our rechargeable batteries in the FL-36:
Ni-MH Quick Charger and Battery Set (B-90SU)
Want to review the manual before purchase? Click here and choose save to download.
Please be aware this may be a large file.
Olympus defines a "Reconditioned Product" as any product that has been returned by our retail partners or our customers. Once the product is returned, Olympus conducts a rigorous evaluation of the appearance and all product functions to make sure that the item meets our quality standards. Your product will function identically to a brand-new Olympus product, however it is possible for a reconditioned product to have a scratch or blemish on the surface.
|
|
|
|
|
Flash (FL-50)
The FL-50 provides GN28 at a 12mm focal length (equivalent to 24mm on a 35mm camera; ISO 100) and GN50 at 42mm focal length (equivalent to 85mm on a 35mm camera; ISO 100).
Features:
TTL auto, auto, and manual modes can be set.
Bounce and swivel head.
Flash coverage is automatically adjusted in several steps to correspond to the image area when zooming. A built-in diffuser can be used to obtain wide-angle coverage at an 8mm focal length (equivalent to 16mm on a 35mm camera).
Attaches to camera via hot shoe, cable or the
FL-BK01 Flash Bracket . When used with the FL-BK01, the TTL-TTL Cable (FL-CB01) is required for cameras with a TTL connector. Cameras with a hotshoe will require the Hot Shoe Cable (FL-CB02) when used with the FL-BK01. Purchase the Hot Shoe Flash Cable (FL-CB05) if you have a camera with a hotshoe and would like to use a generic flash bracket.
Consider using our rechargeable batteries in the FL-50:
Ni-MH Quick Charger and Battery Set (B-90SU)
Disposable batteries for the FL-50:
CR-V3 Lithium Battery 2 Pack (LB-01)
CR-V3 Lithium Battery (LB-01)
Want to review the manual before purchase? Click here and choose save to download.
Please be aware this may be a large file.
|
|
|
 |
|
Flash Adapter Ring FR-1
Needed for Zuiko 50mm f2.0 Macro lens with the Ring Flash Set SRF-11.
Item #260106
|
 |
|
Flash Bracket (FL-BK01)
A flash bracket allows you to move your external flash away from the camera. This will result in more evenly illuminated subjects and reduced red-eye effect. Use with the Hot Shoe Cable (FL-CB02).
Item #200666.
|
 |
|
Flash Bracket (FL-BK04)
For great holding capacity during various photo shooting scenes. With the FL-BK04, a flash can be mounted either on the right or left side of the camera body due to the ingenious arm design.
Possible to mount a flash on the right or left side
The user can enjoy hassle-free Live View shooting at any angle
The attached flash is professionally fixed and secured from shock
Item #260120
|
 |
|
Flash Dome Diffuser
Replacement diffuser for the FL-50R. Can also be used with the FL-50. Provides soft fill and multi-directional flash making it ideal for close work and portrait fill.
Item #260119
|
 |
|
Flash Reflector Adapter (FLRA1)
Replacement reflector adapter for the FL-50R. Can also be used with the FL-50. Provides softer directional flash.
Item #260117
|
 |
|
Flash Stand (FS-FLST1)
Replacment flash stand for the FL36R and FL50R.
Item #260118
|
 |
|
Hot Shoe Cable (FL-CB02)
Attaches to the hotshoe of your digital camera and connects to the FL-BK01 Flash Bracket enabling TTL flash control with the FL-20 Flash, FL-36 Flash , FL-40 Flash or the FL-50 Flash off camera.
Item #200663
Click Hot Shoe Cable (FL-CB02) - Reconditioned for a limited quantity of reconditioned cables at a special price offer!
|
 |
|
Hot Shoe Cable (FL-CB02) - Reconditioned
Attaches to the hotshoe of your digital camera and connects to the FL-BK01 Flash Bracket enabling TTL flash control with the FL-20 Flash, FL-36 Flash , FL-40 Flash or the FL-50 Flash off camera.
Olympus defines a "Reconditioned Product" as any product that has been returned by our retail partners or our customers. Once the product is returned, Olympus conducts a rigorous evaluation of the appearance and all product functions to make sure that the item meets our quality standards. Your product will function identically to a brand-new Olympus product, however it is possible for a reconditioned product to have a scratch or blemish on the surface.
|
|
|
Hot Shoe Flash Cable (FL-CB05)
Attaches to the hotshoe of your digital camera and permits you to use FL-20/FL-36/FL-40/FL-50 Flash or standard type flash with most external flash brackets. The bottom of the hotshoe that holds the flash has a standard 1/4" tripod socket thread.
Item #200707
|
 |
|
Macro Flash Controller FC-01
Compatible with TF-22 or RF-11 and 50mm f2.0 Macro Lens. For use with E-System cameras.
Item #260108-410
|
 |
|
PC Socket Cable (FL-CB03)
Plugs into the PC socket of your digital camera and the TTL connector on the FL-BK01 bracket. The bracket can then be used to trigger a manual style flash mounted in the bracket's shoe.
Item #200662
Looking to save money? We are offering the PC Socket Cable (FL-CB03)- Scuffed Packaging at a special price offer for a limited time.
|
 |
|
PC Socket Cable (FL-CB03) - Scuffed Pacakaging
Plugs into the PC socket of your digital camera and the TTL connector on the FL-BK01 bracket. The bracket can then be used to trigger a manual style flash mounted in the bracket's shoe.
This product is offered by Olympus as a special opportunity for Emporium customers to purchase NEW Olympus accessories at reduced prices. These products all have minor packaging imperfections, such as dented and chipped corners or scratched and scuffed blister packs. The product inside is brand new and covered by a full Olympus warranty.
|
|
|
Power Flash Grip FP-01
For use with E-System cameras.
Item #260102-410
|
 |
|
Remote Cable Grip RG-1
Compatible with Remote release on Power Flash Grip FP-01. For use with E-System cameras.
Item #260103-410
|
 |
|
Ring Flash Head RF-11
A ring flash unit that offers even illumination when used with the FC-1 macro flash controller available separately.
Can be attached to the ZUIKO DIGITAL ED50mm F2.0 Macro lens by using the FR-1 flash adapter ring.
Can be attached to the ZUIKO DIGITAL 14~54mm F2.8~3.5 zoom lens via the lens hood bayonet mount.
Compatible with E-System Cameras.
Item #260110-410
Please note that only employees of authorized E-System dealers can purchase E-System products and accessories.
|
 |
|
Ring Flash Set SRF-11
A set consisting of the RF-11 ring flash and FC-1 macro flash controller. Discover how soft and shadow-free your close-up photos can be with the SRF-11 Ring Flash, utilizing a circular tube as its light source for just the right amount of illumination. Guide number of 36 feet/11 meters at ISO 100. Ideal for medical and macro photography. Includes a case that accommodates both flash and controller units.
The C-5060 Wide Zoom and the C-7070 Wide Zoom require the FR-100 Macro Flash Adapter. The E-System cameras require the Flash Adapter Ring FR-1. Please note this device is only for use with the 35mm and 50mm Digital Zuiko Macro lenses.
Item #260112-410
|
 |
|
Safe Sync Hot Shoe to PC Sync Adapter
This Voltage Regulated PC Safe Sync Adapter connects to the hot shoe of a camera and provides a traditional PC Sync Socket connection. This allows for safe connection of the camera to studio strobes and flashes that require connection with PC Sync cord.
This safe sync hot shoe reduces any PC connected power pack of shoe mounted sync voltage to the digital camera approved safe sync level of 6V and safely reduces voltage from up to 400 volts.
Made of durable machined aluminum.
Features test button on the side of the hot shoe to trigger attached strobes or flash.
Item #200329
|
 |
|
SHV-1 Head Cord
Replacment cord for the connector between the SH-V1 and the FL-50.
|
 |
|
TTL-PC Cable (FL-CB04)
Connects to the external TTL socket of your digital camera and provides a PC socket connection for use with manual style flash units.
Item #200661
|
 |
|
TTL-TTL Cable (FL-CB01)
Attaches to the external TTL socket of your digital camera and connects to the TTL connector on the FL-BK01 Flash bracket. Provides TTL off-camera support with the FL-20, FL-36, FL-40, or FL-50 Flash while on the FL-BK01.
Item #200664
Click TTL-TTL Cable (FL-CB01) - Scuffed Packaging for a limited quantity of cables at a special price offer!
|
 |
|
TTL-TTL Cable (FL-CB01) - Scuffed Packaging
Attaches to the external TTL socket of your digital camera and connects to the TTL connector on the FL-BK01 Flash bracket. Provides TTL off-camera support with the FL-20, FL-36, FL-40, or FL-50 Flash while on the FL-BK01.
Item #200664
This product is offered by Olympus as a special opportunity for Emporium customers to purchase NEW Olympus accessories at reduced prices. These products all have minor packaging imperfections, such as dented and chipped corners or scratched and scuffed blister packs. The product inside is brand new and covered by a full Olympus warranty.
|
|
|
Twin Flash Bracket (FL-BKM03)
Lightweight and compact, the FL-BKM03 is excellent for macro photography. It offers the ultimate in flexibility, allowing two units of any type of flash to be mounted. Because the flash is connected to a movable arm, flash position, direction or angle can be set for optimum performance without being restricted by the lens in use.
Possible to mount one flash on each side of the camera body
The attached flashes are professionally fixed and secured from shock
The user can enjoy hassle-free Live View shooting at any angle
Item #260121
|
 |
|
Twin Flash Head TF-22
Need flash controller to operate. For use with E-System cameras.
Item #260109-410
Please note that only employees of authorized E-System dealers can purchase E-System products and accessories.
|
 |
|
Twin Flash Set STF-22
A package including the TF-22 Twin Flash, the SR-1 Shoe Ring, and the FC-1 Macro Flash Controller.
Compatible with E-System Cameras.
Item #260111-410
|
 |
|
UFL-1 Underwater Strobe & Fisheye Bracket
This tray and arm is a great solution for small housing/strobe combinations where compact size is important. Includes all hardware for mounting any housing with a ¼" x 20 tripod socket. Flexible arm includes top fitting for Olympus UFL-1 underwater strobe.
Item #202259
|
 |
|
UFL-1 Underwater Strobe\Replacement Accessories
This underwater slave flash requires no cables and enables divers to capture stunning images even in the darkest waters. The UFL-01 is incredibly compact and light weight. It has been designed and specially customized for use with Olympus Digital cameras and Underwater Housings. Waterproof to 40 meters, this underwater flash is one of only a few that allow TTL underwater flash photography in slave mode - ideal for multiple flash applications and single flash macro shots. Combining the UFL-01 Flash to your Olympus camera and housing will make underwater photography fun for everyone as it improves the over all lighting capabilities underwater. This means greater image quality and makes diving and underwater photography a whole lot more enjoyable
Waterproof: 40 meters (133 feet)
Slave flash, no fiber optic cables required
Guide Number: 14
Firing angle: 28mm lens equiv.
Power: 2 AA batteries (200 times w/Alkaline, 300 times w/NiMh
Recharge time: 3 seconds)
Flash modes: Manual & TTL
Light temperature: 5600K w/diffuser, 5100K w/o
Operating temperature: 32-104 degrees F
Weight: 425 grams
Dimensions: 90 x 110 x 140mm
Required for use with either of these two arms:
Underwater Long Arm PTSA-01(W)
Underwater Short Arm PTSA-02(W)
Fiber Optic Cable:
PTCB-E02 UW Fiber Cable
Replacement O-ring:
O-Ring for UFL-1\UFL-2 Underwater Strobe
Parts:
Bracket Base Ring
Bracket Collar
Stop Ring
Stopper Bolt
Filter
|
|
|
 |
|
UFL-2 Underwater Strobe\Replacement Accessories
The UFL-2 is an incredibly light and compact TTL underwater flash that is waterproof up to a water pressure equivalent to a depth of 60 meters. It is specially designed for use with Olympus digital cameras and compatible underwater cases.
Waterproof up to a water pressure to 60m depth
TTL underwater flash function
Simple handling above and under water
Exposure control: Manual and TTL setting possible
RC mode
Slave mode
Light temperature: 5600K
Guide Number: 32
Item #260536
Accessories:
Replacement O-ring:
O-Ring for UFL-1\UFL-2 Underwater Strobe
Flash accessories:
PTCB-E02 UW Fiber Cable
Diffuser for UFL-2
Underwater Long Arm PTSA-01 Arm required if not mounting to a bracket system attached to an underwater camera tray.
|
 |
