Product Support

Tough TG-1 iHS

Select the topic that best matches your question: 


Does Olympus offer tips for maintaining and using the camera underwater such as scene modes?

Yes, click here to learn what the different underwater shooting modes are used for and other helpful information.

 

Return to Top

What are the features of the Tough TG-1 iHS?

The Olympus Tough TG-1 iHS is the world's first waterproof/shockproof/crushproof/freezeproof/dustproof digital camera with a fast f2.0 lens, enabling photography in scenarios that would challenge other digital cameras. The combination of durability and outstanding image quality make it possible to shoot stills and HD video in even the harshest conditions. The camera is waterproof to a depth of 12m/40 ft, crushproof to 100 kgf/220 lbf, shockproof for a drop of up to 2 m/6.6 ft, and freezeproof to -10 °C/14 °F.

The camera features a high-speed 12 megapixel backlit CMOS sensor, supported by the TruePic VI image processing engine, resulting in high-speed autofocus, enhanced Intelligent Auto for spectacular scene and subject recognition.

The bright f2.0 4x zoom lens provides a zoom range comparable to a 25-100mm lens equivalent in 35mm photography, with an additional 4x of digital zoom. The 3.0 inch 610,000 dot OLED monitor provides excellent visibility outdoors to compose the perfect shot -- even in sunlight.

The Tough TG-1 iHS shoots in 1080p HD video. The recorded sound in the videos is Linear PCM format, an audio format pioneered by Olympus in our digital audio recorders.

The camera also features GPS and an electronic compass. The TG-1 iHS is equipped with a logging function so you can track the route taken with third-party tracking software.

The 24 Scene Mode and the 12 Magic Mode filters enable applying situation-specific shooting modes artistsic creativity in-camera.

Return to Top

What Is the purpose of the Scene Mode?

The Tough TG-1 iHS has a Scene Mode setting (SCN on the Mode Dial) that optimizes the camera settings for specific shooting conditions. All of the settings applied in the 23 available scenes can also be applied by the controls in the camera's menu, but applying them manually can be time-consuming. In addition, amateur photographers may not have a deep enough knowledge of photography to select the appropriate settings for some situations that advanced amateur and professional photographers might employ.

Return to Top

What is the purpose of the MAGIC Mode?

The MAGIC filters (MAGIC on the Mode Dial) are a set of 12 filters that apply artistic processing in-camera when photos are taken. Because of the processing time required to apply the filters, the image size is restricted to 5 megapixels or lower on some of the filters. In addition, when using the Drawing filter, two images are saved -- an unmodified image and a copy to which the effect has been applied. Some of the MAGIC filter effects can be applied to videos, but you may find the frame rate to be too slow with filters that require more dynamic processing.

Return to Top

What is the purpose of the Low Light Mode?

The Low Light Mode (the candle icon on the Mode Dial) is for shooting using available light in low light situations such as indoors in restaurants and clubs. It is very effective in the TOUGH TG-1 iHS because of the fast f2.0 lens.

Return to Top

What is the purpose of the Super Sport Mode?

The Super Sport Mode (the runner icon on the Mode Dial) is used for capturing high speed sports action. The new Super Sport Mode combines high-speed autofocus with extra fast shutter speeds – up to 1/2000 – to freeze the action. Conveniently located on the dial, this mode captures 5 shots in a high-speed burst to ensure crisp shots of even the most extreme action sport settings.

Return to Top

What are the Custom Modes Setups?

The Custom Mode Setups (C1 and C2 on the Mode Dial) are used for saving and recalling custom menu settings. The options on the mode dial allow for quick access to these user determined custom presets.

To set a Custom Mode:

  1. Set the Mode Dial to the P (Program) mode so that you have full access to the menu.
  2. Open the menu and select the menu options you want to apply to the Custom Mode.
  3. In the menu, select Custom Mode Setup (located in the first setup menu) and press the right arrow button on the four way button pad on the back of the camera.
  4. Select one of the two Custom Modes and press the OK button on the back of the camera.

The menu options are now registered for the Custom Mode Setups. To apply them, simply rotate the Mode Dial to the C1 or C2 position.

Return to Top

When the Mode Dial is set to iAUTO, why are some of the menu options deactivated (grayed-out)?

In the iAUTO shooting mode, the camera determines the appropriate settings for the given shooting conditions and subject matter. The camera will utilize one of the Scene modes, when appropriate. The menu options that control those settings are deactivated (grayed-out) in the iAUTO mode.

Return to Top

The subject I want in focus doesn't line up with the AF frame on the LCD screen. How do I get the camera to focus on the subject?

Using the SPOT autofocus option allows you to more accurately focus on the subject. To lock the autofocus on a specific subject, do the following:

  1. Position the AF frame on the autofocus subject and press the shutter button halway until the AF frame turns green.
  2. While holding the shutter button in the halfway position, recompose the image and press the shutter button all the way down to capture the image.

Return to Top

How do I use the different metering modes?

The Tough TG-1 iHS provides two metering options that allow the photographer to have greater control over exposure. The metering modes are set in the CAMERA MENU. Descriptions and applications of the metering modes are detailed below:

ESP
ESP metering is recommended for general use. The camera meters the brightness at the center of the monitor and the surrounding area separately to capture an image with balanced brightness. When taking pictures against a strong backlight, the center of the image may appear dark.
Spot metering measures the exposure using a very small area in the center of the monitor and can be used to meter a backlit subject. Spot metering must be used very carefully because the brightness within the area on which the metering spot is centered can dramatically influence the final exposure.

Return to Top

The Tough TG-1 iHS has AUTO white balance, so why is it necessary to have white balance presets?

Having white balance presets grants the photographer more creative control. For one thing, daylight can be warm or cold. On a sunny day, early and late light has a warmer appearance than when the sun is high. The AUTO White Balance option might color correct for that warmth, thus taking away the ambience. Using the Sunny day setting will preserve that warmth. The AUTO White Balance will also diminish the red, yellow and orange colors in a sunset, so it is advisable to use the Sunny day setting when shooting sunsets.

On cloudy days, the light seems colder because the clouds absorb the warmer red and yellow frequencies of the sunlight coming from above the clouds. Therefore, there is a Cloudy day setting in the presets to record the images with a warmer appearance. Creatively, the Cloudy day preset can be used on a sunny day to give images a more “golden” appearance, or it can be used to make a sunset warmer.

The Tungsten light setting compensates for the yellowish color cast of indoor lighting and candle light. The Tungsten light setting should be used for shooting subjects being lit with floodlights, for example, for posting to an Internet auction site. Creatively, the Tungsten light preset can be used outdoors in daylight to make the images appear more blue—giving a surreal feeling of coldness and moodiness.

The Fluorescent lamp preset provides a color balance option for fluorescent lights. This preset is valuable when photographing in business and office environments.

Return to Top

With so many White Balance settings available, why and when should I use One-Touch White balance?

Auto White Balance is an excellent option in most shooting conditions, but there are situations that a more accurate and custom option may be necessary.  The One Touch White Balance option allows you to place a white card or white sheet of paper in front of the camera to capture a more accurate reading.  This can be very useful underwater photography and in lighting conditions where a strong color cast is present.

Return to Top

How do I decide which ISO setting to use?

Think of the ISO values as film speeds. Low ISOs such as 100 and 200 are better-suited to situations in which there is a lot of light -- outdoors scenes, for example. Higher ISOs such as 400 and 800, would be used outdoors in bright light to capture fast moving subjects or indoors for available light shooting. ISO 1600 and higher would be used where light levels are very low, such as indoors or at night. The iAUTO and Scene modes automatically set the ISO values.

Return to Top

Can I shoot panoramic photos with the Tough TG-1 iHS?

The Tough TG-1 offers three options for shooting panoramic photos in the Panorama Scene Mode:

  • AUTO -- Three frames are taken and combined in-camera. The user only composes the shots so that the target marks and pointers overlap, and the camera automatically releases the shutter when alignment is achieved.
  • Manual -- Three frames are taken and combined in-camera. The user composes the shots using the guide frame and manually releases the shutter when alignment is achieved.
  • PC -- Up to ten frames can be taken using the guide frames to align the images and manually releasing the shutter. The images are stitched together using the Olympus software included with the camera. This technique produces higher quality images than the in-camera stitching.

Return to Top

Does the Tough TG-1 iHS have a date stamp function?

The Tough TG-1 iHS has a menu setting to enable adding a date stamp to the lower right corner of the image that will appear on the file on a computer and in prints. The calendar information must be entered into the menu correctly. However, be aware that once the date stamp has been embedded in the image, it cannot be erased because the image pixels have been overwritten by the date stamp. The date stamp only embeds the date and not the time. If you want to embed the date and time, you will have to use third-party software which can retieve the date and time from the metadata of the image.

Return to Top

How can I reduce the interval between shots?

Like any digital camera, the Tough TG-1 iHS needs time to write images to the memory card. However, images shots rapidly, such as in the Super Sport Mode, are saved in the camera's memory buffer while they are being written. You can also use one of the Sequential Drive Modes, which rapidly shoot images as long as the shutter button is pressed down. The camera can shoot at 5, 15 and 60 frames per second. In the 15 and 60 frames per second options, the file size is limited to 3 megapixels per frame and the ISO is fixed to AUTO.

.

Return to Top

What does the INFO button do?

The INFO button allows you to toggle to different displays to show you information about the image or current camera settings. There are three views available, with one providing the most details about the image, including a histogram and grid lines used for composing photographs. The displays vary between the shooting modes and the playback mode.

Return to Top

How accurate is the GPS (Global Positioning System) in this camera?

The positioning system itself has a variance, or error tolerance, of about 25 feet in the proper environment. The variance may become larger depending on the environment.

Return to Top

What is A-GPS data and how ofter do I need to updated it?

The camera uses supplementary orbital data for improved signal aquistion.  This will increase the accuracy and performance of the GPS function.  The A-GPS data should be update every 14 days, to insure the best performance.

The updater program can be downloaded from the folowing web page:

http://sdl.olympus-imaging.com/agps/

Return to Top

How can I view GPS data in the camera without going through the menu?

Press and hold the Menu button for a few seconds until the Positioning Information screen is displayed.

 

Return to Top

Is the GPS data captured when recording movies?

No, GPS data is not only available and stored with still images.

Return to Top

Does the GPS setting stay active even with the camera powered off?

Yes, the GPS is active aquiring location information while the camera is powered off.  This allows the camera to have the most current information at all times. To increase battery life while camera is not being used, turn the GPS function off before powering down.

Return to Top

Are there accessory lenses for the TOUGH TG-1 iHS?

There are two accessory lenses available: The Fisheye converter (FCON-T01) and the Teleconverter (TCON-T01), which are mounted on the camera using the CLA-T01 Adapter. All are available at the Olympus Store by clicking here.

The lenses are weatherproof and waterproof and can be used underwater. The CLA-T01 also uses the filter thread to accept 40.5mm filters.

Return to Top

Is there an underwater housing for the Tough TG-1 iHS?

The underwater housing for the Tough TG-1 iHS is the PT-053, which allows the camera to be used to a depth of 45 meters. It is available from the Olympus Store by clicking here.

Return to Top

What types of memory cards can be used with the Tough TG-1 iHS?

The Tough TG-1 iHS accepts SD media, including SD, SDHC and SDXC cards, in capacities ranging from 128 MB to 64 GB. It supports the SD speed class and the UHS-1 speed class, and it is Wi-Fi compatible when used with an optional Eye-Fi™ card.

When shooting HD movies, please use a card with an SD speed class of 6 or higher or a UHS-1 speed class.

The Tough TG-1 iHS does not accept xD-Picture Card media or CompactFlash® cards.

Memory cards are optional accessories and must be purchased separately. Olympus does not manufacture SD media. For a list of memory cards that have been tested and are known to be compatible with the Tough TG-1 iHS, please click here.

Return to Top

How is the camera's battery charged?

It can be charged in-camera either with the bundled F-2AC USB AC adapter or from a USB port on a computer.

To charge the battery, in the camera's SETUP menu, make sure the USB CONNECTION is set to AUTO. When the USB cable is connected, the LCD screen on the camera will display a USB menu. Select CHARGE and press the OK button. The orange LED on top of the camera will light up. When the LED goes dark, the battery is charged. The computer must be powered on to charge the battery.

If you are traveling internationally, the F2AC USB-AC adapter will automatically adjust to the local current. You only need to purchase the appropriate plug adapter for the country you will be visiting.

 

 

Return to Top

I lost the lens ring for my camera. Is the camera still waterproof?

The lens ring on the TG-1 iHS is only cosmetic and has no effect on the waterproof integrity of the camera. It is removable so that the CLA-T01 Adapter can be mounted on the camera to accept the TCON-T01 Teleconverter Lens and the FCON-T01 Fisheye Converter Lens.

Make sure that the lens is firmly clicked into the locked position when remounting the lens ring on the camera.

Return to Top

Sometimes when I'm shooting in dim light I have difficulty getting the camera to focus. What can I do?

The Tough TG-1 iHS has a built-in AF Illuminator that will project light on a subject in a dark environment to assist the autofocus. In the camera's menu, set AF Illuminat. to ON. Then, when the shutter button is pressed halfway down, the AF Illuminator turns on to aid focusing.

Return to Top

How can I maintain the waterproof capability of the camera?

The TOUGH TG-1 iHS loses its waterproof capability if the battery/card compartment cover or the connector cover is open. Before using the camera, make sure that all the covers are closed firmly so that each lock makes a clicking sound. Do not open the battery compartment cover or the connector cover with wet hands, while underwater, or in a damp or dusty environment (e.g. the beach).

In addition, take the following care precautions when using your camera:

  • Follow all recommended care and maintenance instructions in the product manual.
  • After using the camera in an environment where it may be exposed to dirt, dust or sand, wash the camera using the following method:
    • Fill a bucket with fresh water, immerse the camera in the bucket with the lens surface downward and shake the camera thoroughly.
    • Let the camera air dry in the shade with good ventilation.
  • Do not leave the camera in water for a prolonged period. Doing so can damage the camera's appearance and/or deteriorate water resistance.
  • Do not pour running water over the camera directly from a water faucet. Doing so can deteriorate the camera's water resistance.
  • Do not use chemicals for cleaning, rust prevention, anti-fogging, repair, etc. Doing so can deteriorate the camera's water resistance.
  • Do not leave the camera in an environment at high temperature (104° F / 40° C or greater) or very low temperature (14° F / -10° C or lower). Doing so may break down water resistance.
  • Do not apply excessive force to or attempt to peel off the rubber backing of the battery compartment cover or the connector cover.
  • If the rubber backing becomes worn or damaged, contact the nearest Olympus service center. (A charge will be assessed for replacement of parts.)
  • Olympus recommends replacing the waterproof packing and seals annually.
  • If the rubber packing of the battery compartment cover or the connector cover contains dirt or sand, wipe it off before closing the cover; otherwise, water may get inside the camera.

Return to Top

I can't get a sharp image using Night Scene. What am I doing wrong?

The NIGHT SCENE and NIGHT+PORTRAIT Scenes are meant to take long exposures of skylines and city streets by leaving the shutter open for several seconds. Camera motion while the shutter is open causes blurriness. Therefore, it is necessary to stabilize the camera by bracing against something solid or using a tripod or a camera clamp.

Return to Top

I went on a vacation and used several memory cards. Now, when I'm downloading the images onto my computer and trying to save them, I get a message that says, "Image file-name.jpg already exists. Repalace it with the new file?" What's going on?

The Tough TG-1 iHS has two settings for creating file names for the images it captures:

  • AUTO - Even when a new card is inserted, the folder numbers are retained from the previous card. If the new card contains an image file whose number coincides with one saved on the previous card, the new card’s file numbers start at the number following the highest number on the previous card.
    Put simply, the camera picks up where it left off when naming files.
  • RESET - When a new card is inserted, the folder numbers start at 100 and the file numbers start at 0001. If a card containing images is inserted, the file numbers start at the number following the highest file number on the card. If the card has been formatted, the file names will start with 0001.

    Put simply, the card starts naming files anew beginning at 0001. At some point, the computer will start seeing duplicate numbers. When multiple cards are downloaded in this setting, each duplicate file name will have to be renamed individually or else the like-named files will overwrite their predecessors when they are saved to the computer. The original images will no longer be viewable.

Return to Top
  • Professional DictationLifeproof.
  • Shop the Olympus Store