Disposable V-System Triple Lumen Extraction Balloon |
 |
| |
| • The Multi-3VTM has a C-Hook allowing it to be attached to the V-Scope offering the endoscopist greater device control, and the ability to manipulate the guidewire, balloon and injection. |
 |
| • The V-Marking, located on the proximal side of the sheath, indicates when to raise and lower the V-Groove elevator. |
|
| • The V-Sheath design allows the guidewire sheath and the injection sheath/ handle to be separated allowing control of Multi-3V by the endoscopist or the assistant. |
|
• The balloon can be inflated  to diameters of 8.5mm, 11.5mm, or 15mm. |
|
| • Three pre-measured syringes allow precise inflation of each balloon to the appropriate size. |
|
| • Two different models allow contrast media to be injected from above the balloon or below the balloon depending on the clinical situation. |
|
| • The shaft of the Multi-3V tapers from 7 Fr. to 5 Fr. over the length of the catheter to allow easier and less traumatic insertion into the duct. |
|
